How to Flash a Custom Recovery on the Blade

Flashing a Custom Recovery on your Blade will let you play around with a of custom ROMs available out there for your device and this will keep you happy with your oldy device, at lst for some time. Fortunately, the CWM Recovery is available for the Blade device and this guide shows how you can flash it on your device. As soon as you’re done with the procedure, you’ll have a working custom recovery up and running on your device. So, let’s get started:BY EditAndroidI. Before You Begin:1. You must have done ourHow to Root the Bladeprocedure.2. This will replace your current recovery with the CWM Recovery.II. Downloading Required Files:1.ClockworkMod Recovery 2.FastbootIII. Flashing a Custom Recovery on the Blade:1. Download and place both the files onto your Desktop.2. Extract files from theFastbootarchive over to your Desktop.3. Turn ON the USB debugging function on your device by going toMenu>>Settings>>Appliions>>Development>>USB debugging.4. Once enabled, connect your device to your PC using the USB cable.5. Launch a Command Prompt Window on your Desktop. To do so, simply hold down theShiftbutton on your board and right-click on any blank ar on the screen, then selectOpen command window here.6. Type in following commands into the Command Prompt hittingENTERafter ch line. Make sure to replecovery.imgwith the actual name of the Recovery you downloaded.adb push psneuter /data/local/
adb shell chmod 04775 /data/local/psneuter
adb shell /data/local/psneuter
adb push flash_ /data/local/
adb shell chmod 04775 /data/local/flash_
adb push recovery.img /sdcard/
adb shell /data/local/flash_ recovery /sdcard/recovery.img
adb reboot recovery7. Your device should reboot into the newly installed Recovery mode.8. And you’re all set!Awesome! Your device has been successfully equipped with a custom recovery to let you enjoy the custom developments available for your device!