Tuesday, May 24, 2016

Lava Xolo A700 Rooting,Recovery,CWM,Custom Rom All in One



1.How to root or unroot Xolo a700?
By editandroid.blogspot.comRooting of Xolo a700 is not so hard
Here is the Simple method of Rooting
First Enable USB Debugging From Setting>Development
Install Drivers in PC with PDanet Download Here
Follow The instructions given by PDAnet
When Drivers installed Exit PDAnet from System Tray
Now Download & Extract The Root Toolkit From Here
Now connect Device Make sure USB debbuging is ON
Don't Select USB storage Etc.
Now open the Extracted folder of root toolkit
Run the Runme.bat file
Cmd Open,Select what you want Root or Unroot
And let it DONE

Press the restore button Whan it shows on your phoneWhen the cmd show the process is completeDisconnect your device from PCNow check your phone is Rooted or NotIf the phone is Rooted A supersu named app is in your phone
2.How Install CWM recovery In Lava Xolo A700?
Follow this Instructions For install CWM Recovery
1) Root your phone.
2) After rooting, install "Mobileuncle Tools" from Play Store.
3) Download recovery.img from Here
4) Copy the downloaded recovery.img to the root of your SD-Card.
5) Open Mobileuncle Tools and click on "Recovery Update".
6) Click on recovery.img and reboot in recovery


3.How to Boot in Recovery In Lava Xolo A700?
IF you want to boot in recovery
Power Off your xolo a700
Press this three buttons at same time
Volume UP+ Left Soft+Power Button untill it boot you in recovery

Custom ROM For Lava Xolo A700
A XDA member make a custom rom for xolo a700
This rom is Excellent And works grt in xolo

Ftures Of Custom Rom


Boot Logo Boot AnimationFully DeodexedBased On Mito A322's StockUltra StableCamera Fix(Sharper s)Fastest Gps FixesCustom Framework For Buttery TransitionsTransparent UIAcid! Engine(Sound That Will Blast Your Hd)Bravia Engine 2(Awesome Display Quality)Proximity Sensor Twked & Light Sensor TooZipalignedBest For GamersProximity Sensor TwkedInit.d Twks2 GB Partition For Apps And 512mb Internal Memory

Installation Instructions-



Put Xtrance V1.0 on Your Sd CardBoot Into Recovery And Fully Wipe Your A700 Incuding Dalvik CacheToggle Signature VarifiionFlash Xtrance V1.0 From The Root Of Your SD CardWipe Cache and dalvik cacheBoot ItNow Experience The Smoothness Of Xtrance V1.0



For 2Gb Repartition Plse Backup All Your DataInstall The Apk(MT6577_DATA_REPARTITION.APK)Then Select the size of your partition(Not More than 2gb)Click on desired Partition Size And You Are DoneWipe Dalvik And Format The Internal Sd Card From MountsRestore Backup

Now You Can Rock The Power Of 2Gb Internal Memory


Download Custom Rom From HereDownload 2GB Partition APK HereWho Want Stock Logo Click Here


2nd Custom Rom For Lava Xolo A700 Lewa OS

Things you need:
A lava Xolo A700
CWM recovery Installed Follow the method given above in this post

Ftures:
Superb UI (User Interface)
Super Stable
Battery Optimized
Extremely Twked
Awesome Sound
Sensors are Twked
No need of Hd with playing FM

Screenshots:






Installation:
Download Lewa OS from Here
Copy it in your SDcard (In root folder)
Boot into Recovery & Full Wipe Data,Cache,Dalvik cache
Toggle Signature Verifiion
Flash the Lewa OS downloaded file from your SDcard
Wipe Cache & Dalvik Cache (Don't Wipe Data)
Reboot your Lava Xolo A700
First Boot can take some type
Enjoy Lewa OS
If you Like this Rom Plse Support the Developers By Donating
Click Here


If you Face Any Problem Contact us By CommentDonate Us if it Help you and help us to Buy our own Domian & hosting.

How To Root Micromax Canvas 2 A110



Because rooting, actually gives you complete control over your Mobile, and by rooting, you can delete the bloatware that comes preinstalled in your mobile, remove ads from all apps, install custom ROMsBy editandroid.blogspot.comEnsure that the battery is above 80 %.Go to Settings > Developer Options > Turn On USB Debugging.Now DownloadThis Tool.Unzip the tool that you have downloaded.Connect Canvas 2 to your PC.Run the Runme.bat file, that you have downloaded rlier. A command prompt will pop up.Follow the on screen instructions properly.Type in "i", and hit enter.Your device will reboot.That is it, rlly...Now enjoy a rooted Canvas 2...


Donate Us if it Help you and help us to Buy our own Domian & hosting.

How Root Optimus G E975




The Optimus G E975 was relsed recently by , and it was available on the stores just yesterday, but today Optimus G E975 has been rooted successfully. This is how fast the developers work that just one day after the relse of Optimus G E975 the device has been rooted. So here's how to Root Optimus G E975.
By editandroid.blogspot.com
Optimus G E975 Root AdvantagesGives you complete control over your Optimus G E975.Allows you to install root only apps.Allows you to install custom ROMs.Gives you complete control over your Optimus G E975.
Optimus G E975 Root RequirementsBasic knowledge of rooting.Download the root file. (Link to download)
Root Optimus G E975 GuideConnect you Optimus G E975 to your PC.Now install the Optimus G E975 drivers.Now unzip the downloaded file.In your Optimus G E975, go to Settings, and turn on USB Debugging, in the Development section.Also, plse see that you are in Charge Only Mode.Now run CurrentRoot.bat file that you downloaded, and wait for prompt.Change to MTP mode, in your Optimus G E975.Wait for you PC to ask how to view files.Select CMD Prompt, and press enter to continue.Done, your Optimus G E975 will be rooted.That's it ! Congrats you have rooted your new Optimus G E975. Now enjoy a completely rooted Optimus G E975.Donate Us if it Help you and help us to Buy our own Domian & hosting.

Micromax Canvas HD A116 Root,Recovery,Stock Rom,Custom Rom All in One Place



The Micromax A116 Canvas HD is everywhere. The smartphone is also 7 on the popularity list on GSMArena. Having sold out their first and second batches within minutes and hours
By editandroid.blogspot.com
respectively, Micromax is seriously on a roll! It's only been a few days since buyers all over India have started receiving their fresh new Micromax A116 Canvas HD smart that a method to gain ROOT access has alrdy been found! Well, in that case why should you stop from rooting your own? Here's how!
How Flash Stock rom
Requirements:
Stock ROM
Flash Tool
A computer
A Micromax A116 (obviously)

Steps:-
1. Install drivers for your phone using Micromax drivers.
2. Extract the Stock ROM folder
3. Extract and open the SP Flash Tools.
4. In SP Flash Tools, click on Ster-Loading and the program will ask you the loion of the ster loading file for your device.
5. In the extracted folder of the stock rom, go to the folder named "S9201_MP_F4_B1_IN_MMX_0.16_flasher_user" and select the file "MT6589_Android_ster_emmc" which is our ster loading file.
6. Switch off your phone (Remove the battery to make sure it is switched off).
7. In Flash Tool, go to Options and Click USB Mode so that it is enabled. Click options again and then go to DA Download All > Speed and finally select High Speed.
8. Click the Download option (present on the right of Firmware
> Upgrade option) and the flash tool will start looking for your phone.
9. Connect your phone now. The Flash Tool will start the flashing process, the progress of which can be viewed from a yellow progress bar at the bottom of the flash tool.
**Don't interrupt this process as it can potentially brick your device.
**Make sure no power interruption takes place. (Use a laptop to ensure this).
10. After the process completes, a green ring will appr on your device signalling that the process was successful.
11.Disconnect your phone.

Changelog:
Software relse notes
1. With a fix of unable to install Flip board appliion.
2. With a fix of auto rotation issue.
3. Live wallpaper is integrated as a option for user to set as manual.
4. M! Store appliion is removed.

Download Package:Here
Flash Tool:Here
Drivers:Here
Micromax Canvas HD Stock Rom
Download Here

How Root & Install CWM Recovery
Use Flash Tool For Flashing of CWM
Steps To Follow:-

1. Install drivers for your phone using Micromax drivers.
2. Extract the Stock ROM folder and replace recovery.img with cwm recovery.
3. Extract and open the SP Flash Tools.
4. In SP Flash Tools, click on Ster-Loading and the program will ask you the loion of the ster loading file for your device.
5. In the extracted folder of the stock rom, go to the folder named "S9201_MP_F4_B1_IN_MMX_0.16_flasher_user" and select the file "MT6589_Android_ster_emmc" which is our ster loading file.
Check only recovery.img, preloader and uncheck all others.
6. Switch off your phone (Remove the battery to make sure it is switched off).
7. In Flash Tool, go to Options and Click USB Mode so that it is enabled. Click options again and then go to DA Download All > Speed and finally select High Speed.
8. Click the Download option (present on the right of Firmware
> Upgrade option) and the flash tool will start looking for your phone.
9. Connect your phone now. The Flash Tool will start the flashing process, the progress of which can be viewed from a yellow progress bar at the bottom of the flash tool.
**Don't interrupt this process as it can potentially brick your device.
**Make sure no power interruption takes place. (Use a laptop to ensure this).
10. After the process completes, a green ring will appr on your device signalling that the process was successful.
11.Disconnect your phone.

Download CWM Recovery: Here
Ster file:Here
Download flash tool and drivers from link given above

After Flash CWM in Your CANVAS HD
Flash This both ZIP File With CWM
1st File
2nd File

Now You GOT Root & CWM In CANVAS HD

Custom Rom For CANVAS HD
Here is some Custom Roms for CANVAS HD
This links Are of Their own thrd
Donate Them if you like Their Work

JELLYSMART
JELLYXPERIA
JELLYDMON V1.0 For Micromax A116 Canvas HD
[ROM] [4.2.1] MegaHD Rom For Micromax A116
[ROM] [4.2.1] Lewa OS For Micromax A116



LESS MEMORY AND BAD CAMERA IS THE MAIN DISADVANTAGE OF CANVAS HDHERE IS METHOD FOR SWAP INTERNAL & EXTERNAL MEMORYFirst of all plse backup every important file in both your internal storage and external storage as anything can go wrong at any time.Now go to Play Store, and install Root External 2 Internal SD ( Link :Root External 2 Internal SD)Now download ES File Manager from Play Store. ( Link :ES File Explorer)Open ES File Explorer, go to Settings > Root Setting > check Root Explorer, in the pop up to grant permissions grant it permission.Go to your Internal SD Card folder, and copy the Android folder.Paste in into your external SD Card.Open Root External 2 Internal SD Card.Allow it Super User permission.Press I Don't Care.Un check Set At Boot.Now press the Swap button.HERE MY WORK IS DONE....HOPE YOU LIKE MY WORK.....


Donate Us if it Help you and help us to Buy our own Domian & hosting.

How To Root Any Xperia Device






How To Root This Smartphone By Just One Click....sy Method Of Rooting Xperia Devices
By editandroid.blogspot.comDownload This ToolDownload HereDownload And InstallPC Companion From Official SiteFor DriversMake Sure That USB Debugging&Unknown Resources is ONConnect Your Xperia To PC(let the driver install)Run The Tool And Click On RootWait to BE Done
Donate Us if it Help you and help us to Buy our own Domian & hosting.

Galaxy S advance All in One Toolkit For ROOT/RESET/RECOVERY/KERNAL/DOWNLOAD CUSTOM AND STOCK ROM/FLASHING




THIS TOOL IS FOR GALAXY S ADVANCE OTHER GALAXY SMARTPHONE USER PLSE DON'T USE THIS TELL YOUR PROBLEM TO US WE WILL HELP YOU
FTURES OF TOOLKIT
By editandroid.blogspot.com
1.FLASH kernal.bin.md5
2.FLASH RECOVERY.IMG LIKE CWM/TWRP RECOVERY
3.TAKE A LOG
4.ROOT/UNROOT YOUR DEVICE
5.FLASH UPDATE.ZIP (OTA UPDATE)
6.BACKUP/RESTORE
7.WIPE DATA/RESET
8.DOWNLOAD AND FLASH CUSTOM ROMS
9.DOWNLOAD AND FLASH STOCK ROMS
10.BUILT IN ODIN
11.CONVERT kernal.bin.md5 to tar ODIN FLASHABLE
12.INSTALL DRIVERS
13.CHANGE GUI COLOURS

DOWNLOAD HERE

DOWNLOAD THE TOOLKIT FROM ABOVE
OPEN THE ZIP FILE
EXTRACT IT
RUN TOOLKIT.EXEDonate Us if it Help you and help us to Buy our own Domian & hosting.

How To Root,Recovery Cwm & TWRP Galaxy S4 i9500






Plz Do All This Steps Carefully
By editandroid.blogspot.com
1.Download USB Drivers for and Install them in your PC....
2.Turn ON Usb Debugging (Important)
3.Crte A Backup Of your Data
4.Make Sure The Battery is More than 80%...
5.The root method works only on the Galaxy S4 I9500 running on Android 4.2.2 XXUAMC6 Jelly Bn; applying this root to incorrect variants will brick the device.
Now FOLLOW This Steps Carefully......
1.DownloadI9500XXUAMC6 pre-rooted firmwarefor Galaxy S4 to the computer and extract the zip file
2.DownloadOdin v1.85which will help to root the Jelly Bn firmware
3.Turn off the Galaxy S4 and enter Download Mode. Press and hold Volume Down + Home buttons together and then press the Power button until the construction Android robot and a triangle are seen. Press the Power button again to enter Download Mode.
4.Run Odin on the computer
5.Connect the phone to the computer using USB cable while it is in Download Mode. If the device is connected successfully, one of the ID: COM boxes will turn yellow with the COM port . This step might take some time
6.Select the files mentioned below to install on the phone
a) Click on 'PDA' and select file with '' in its name

b) Click on 'Phone' and select file with 'MODEM' in its name

c) Click on 'CSC' and select file with 'CSC' in its name

d) Click on 'PIT' and select the .pit file

[Note: Ignore the last three steps in case such files are not found.]
7.Ensure the 'Auto Reboot' and 'F Reset Time' options are selected in Odin. Also ensure the 'Re-Partition' option is selected in case the .pit file is being used8.Double check everything and finally click the 'Start' button in Odin. The installation process will begin and take a few minutes to complete9.After the installation process is completed, the phone will restart automatically. Once the home screen apprs on the device, unplug the USB cable


CWM & TWRP Recovery for Galaxy S4 i9500
Download CWM Recovery Here
Download TWRP Recovery Here
Download Stock Recovery Here

This has not been tested by me and is still experimental. I hold no responsibility


Congrats Your Galaxy S4 is Rooted.Open AppDrawer and srch For Superuser.To ensure The Root is Installed & Working.......Plz Comment & Share It...Donate Us if it Help you and help us to Buy our own Domian & hosting.

How To Root & Unroot Galaxy Ace s5830i sy Method


(sy and Simple Method)
Many Peoples Are Not Able to Root Their Galaxy Ace Some Peoples Don't Know How To Unroot
By editandroid.blogspot.com Here Is The All In One Solution For This Problem By EditAndroid.Blogspot.Com Follow This Steps To Root Your Galaxy Ace1.Download Root file: Click Here2.Now Transfer This File To Your SDcard (Root Directory)3.Now Turn Off Your Phone.....4.Now Press This Button Home Button + Power Button+ Volume Up (At a Time)5.Keep All Button Pressed Wait For Sometime You Are In Recovery ModeUse Volume+ & Volume - Buttons For Scroll Up & Down Use Home Button For Select Anything6.Now Select Apply Update From Sdcard7.Select The file you DownloadNow Wait & Watch The ProgressNow Select Reboot Your DeviceCongratsss Your Device Is Rooted
For Unrooting Of Your deviceDownload Unroot File : Click herePut It Into The Root Of Your SdcardAnd Follow The Steps You use For Rooting
2.Now Transfer This File To Your SDcard (Root Directory)3.Now Turn Off Your Phone.....4.Now Press This Button Home Button + Power Button+ Volume Up (At a Time)5.Keep All Button Pressed Wait For Sometime You Are In Recovery ModeUse Volume+ & Volume - Buttons For Scroll Up & Down Use Home Button For Select Anything6.Now Select Apply Update From Sdcard7.Select The file you DownloadNow Wait & Watch The ProgressNow Select Reboot Your DeviceCongratsss Your Device Is Unrooted
If You Face Any Problem Feel Free To Contact UsComment Or Mail Us Your Problem For Any DeviceWe will try To Solve ItDonate Us if it Help you and help us to Buy our own Domian & hosting.

Custom Rom for Google 10 [ROM][JB 4.2.2][PA3.10][AOKP-MR1][CM10.1]P.A.C True All in 1 ROM[04/03][V21.0.1]




By editandroid.blogspot.comCan't settle on a rom... Like one rom, but wish it had ftures of another... Well look no further...
PACman is a unique rom.
We have picked the best ftures from CM10, Aokp and PA and combined them in a single rom so you get the experience you deserve
To enjoy the ftures of every available project without the hassle of flashing regularly.
The Rom is rock stable for an average user but keep in mind the Rom is in WIP stage so expect some minor hickups but we are trying our best to resolve these issuesThis is built entirely from source so its not a port, which in my opinion makes it a little more stable as its been made specifically for this device...Source Available here....PacManFtures
* CM10.1 * AOKP - mako_jb-mr1_build-1 * Paranoid Android 3.10 *I've decided to keep this rom simple and I've not added all the extras some other roms have added, because in my eyes keeping it simple keeps it more stable... If you want all those extras you can rdily find them and flash them after the rom... but if you've flashed the extras don't complain in the thrd about things not working....:CHANGELOG:
PACman v20.1.0
Added Swipe to QS
Fix FC when adjusting Radio Band
Added Bionic & Krait Optimizations

PACman v20.0.0
Settings FC's fixed
Compiler issues fixed

PACman v19.9.1
Updated to 4.2.2
Paranoid Android updated to 3.00

Initial Relse
PACman v19.9.0
CM10.1
AOKP
Paranoid Android 2.99 with Pie
MultiUser AddedWhats not working? You tell usYou Tell Me1. Download rom ... Duh!
2. Put rom on SD card
3. Make sure you have latest Gapps on there too
4. Factory Wipe/Data Reset, Wipe Cache and Wipe Dalvik Cache
5. Flash Rom
6. Flash Gapps
7. Some like to wipe cache again... If you normally do that, then do it
8. Reboot
9. Enjoy the Rom...---------------------------------------------------------------------------------------------------------------------------------------------------------------------This is the thanks bit now... firstly the other Musketeers...
Benjamin.j.Goodwin - for being an absolute star, giving me pointers and helping out a lot... A rl lot
Shingers5 - for his tireless testing, ids and erally keeping me on my toes... and of course being a ledThanks also goes out to
PACman Tm - Special thanks
CM tm
Paranoid Android tm - for being the most innovative devs out there at the minute
AOKP Tm
DutchDanny - for getting me started and being patient with me while I was asking silly questions
BinDroid Tm for loads of help when I first started
XDA for just about everything else
Finally my girlfriend for putting up with me being sat on here for hours on end lol
If you think you need to be thanked, just let me knowPACman v20.1.0Gapps 4.2.2Older Builds
PACman v20.0.0
PACman v19.9.1
PACman v19.9.0
screenshots:Donate Us if it Help you and help us to Buy our own Domian & hosting.

How to Root Xperia Z For locked & Unlocked Bootloaders




PLSE RD THE COMPLETE POST BEFORE YOU TRY THIS!Disclaimer/Warning!:
By editandroid.blogspot.comusers are reporting that NFC is after this root method (sy fix by goroh_kunhere)if u had an unlockable bootloader device, after using this method the device will be detected as LOCKED or unlock not possible!!! (to fix this usethis fix)
Requirements:Xperia Z with stock JB firmware (as of now tested on:10.1.D.0.317,10.1.D.0.322,10.1.A.1.350)works on both locked/unlockable bootloaders!ADB drivers installed (use this fileincase u need to install drivers)
IMPORTANT:if you are using 8 you will need toenable few thingsto allow driver installationRooting Toolkit package provided belowHow-to:incrse screen timeout to 10 mins:Settings -> Display -> Sleep -> 10 minsenable USB debugging :Settings -> Developer options -> EnablndSettings -> Developer options -> USB Debugging (check it)enable install from "unknown sources":Settings -> Security -> Unknown source (check it)download the rooting toolkit package and save it on C:\exit all adb requiring apps like PC Suite, PC Companion, Flashtool, etc as they will interfere with the rooting processextract the ENTIRE contents of the package (and not just one file) to some directory on c:\once you are rdy with all the above connect phone to PC and execute "runme.bat" from the loion where the entire contents are extractedpress enter to start the process, as the device is detected the toolkit will start executing steps one by onekeep watching the command prompt and wait for the following to come up "press the button to restore the data in your phone"at this point look at the device screen, an app will start, select RESTORE datanow u will get "if Restoring data is complete," in the command promptat this point open Phone & dial*#*#7378423#*#*select "Service tests" in your phone operation.select "Display" (screen will turn white), the toolkit will now start executing some commandsnow press power button to turn off screen wait for few seconds and press it power button again (rept it a few time) till then keep observing the command prompt for outputsu will see "transfer files to your phone part2", "installing busybox,su,Superuser,etc..." & finally "Clning up"after that the device should automatically rebootthats it device should now be rootedTroubleshooting:if your device has unlockable bootloader then after applying this the bootloader status will turn "Bootloader unlock allowed:No"
in that case dont worry the users have reported that doing a repair via SEUS will flash back stock firmware and turn this status to "Bootloader unlock allowed:Yes" (the same might also be achieved by flashing a stock FTF using FlashTool <yet to be confirmed>)ROOT WILL BE LOST BY DOING THE ABOVE AND YOUR INTERNAL STORAGE MAY GET WIPED!
SO DO A BACKUP OF APPS & INTERNAL STORAGE ON AN EXTERNAL SDCARD/PCFAQ:will this wipe /data
NO.since we are not the bootloader the /data partition will not be wipeddo i need to unlock bootloader for this to work?
NO.will i lose Bravia Engine 2 ?
NO.does rooting without the bootloader still voids warranty.
Not if you get back on cln Stock ROMDonate Us if it Help you and help us to Buy our own Domian & hosting.

How To Root Butterfly X920D




1st Step:
By editandroid.blogspot.com
1-Unlock the bootloader -Click HereSome Id how to do it2-Flash TWRP on your Phone : Download and Unzip this toolsHEREhttp://d-h.st/2x9to Flash TWRP recovery on your Butterfly (just for window) it works for me -thanksjoaquinf3-To get rootHEREhttp://d-h.st/qdq(update 17.2.13)
Put the SuperSU .zip file on your sdcard
From TWRP, tap Install
Find the file and select it
Swipe the arrow from left to right to install
Tap Reboot System
Done
Good news u have successful to root and having recovery on your phoneBe sure u Back up your current Build before u done any modding and flashing .Good luck GuysSharing is JOYDonate Us if it Help you and help us to Buy our own Domian & hosting.

How to Root/Unroot Razr HD



I grabbed this from the Razr M forums, it will work for a variety of new Devices.
By editandroid.blogspot.comInstructions:DownloadUnzipInstall DriversEnable USB Debugging on PhonePlug Into PCRun The Batch File "Run"Follow Along the CMD Prompt for Progress & Let it FinishEnjoy and Hope for some Developers to Pick Up This Phone to Rom**UPDATE**JellyBn OTAIn order to update to the latest OTA without losing root you need to:Be Rooted on ICSUse VooDoo Rootkeeper to do the followingProtect RootTemp UnrootTake the JB OTARestore RootEnjoy being both on the latest and rooted. Remember, do not just take the update without doing both those two things as there is no root currently available for JB.This is a one-click-method so all you have to do is the prerequisites and it will do the rest for you.~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~
How toUnroot:
Thanks shabbypenguin for posting this.You can manually unroot your Droid by using a root file manager program (such as root explorer) and mountsystem as R/W. Then delete the following:/system/app/Superuser.apk
/system/bin/su
and if it has it
/system/xbin/su
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~Downloads:
Here's the link to the drivers: Drivers
Root File isattachedto the Post, but here are some Mirrors:
Mirror 1
Mirror 2Rooting your phone works whether you have the Developer version or not.Hit thanks if this made you happy!Screenie:

Droid Razr HD root.zipDonate Us if it Help you and help us to Buy our own Domian & hosting.

How to Root & Install CWM Recovery in Xperia J



Make sure u are in 11.0.A.3.28 or 11.0.A.3.18 firmwareALONEwith Locked Bootloader..This method Dosent Work on 11.0.A.7.5 Firmware!
By editandroid.blogspot.com
for11.0.A.3.28firmware download fromhernd flash itif u dont have a flash tool download it fromherefor and install drivers loed in C:\Flashtool\drivers (choose all drivers)since flash tool does not have xperia j drivers..u may hav flashing problem...for that1.download and extract d ST26.zip ive uploaded
2.open flash tool
3.click devices>import
4.navigate to d file u've extracted
5.now xperia j driver is installed
u can now flash without problemsNow back to rooting...
Root first! thn apply CWM!Steps for Rooting:1.extract Root_J.zip
2.make sure 'usb debugging' is enabled in devolpment settings
3.double click Runme.bat file for users...runme.sh for linux users
4.wait for process to finish (mostly should work)Steps for CWM:1.extract CWM_J.zip
2.'usb debugging' on
3.double click 'install.bat' only for (linux not working! my bad..)
4.wait for it.....installed! close the shell program and switch off the phone..Plug in charger or USB....the phone switches on....press up and down volume reptedly when logo flashes.....voila u get into CWM!
You need plugged in charger or USB to goto CWM! ElseCWM wont Work!!reboot to system and see if supersu is installedfinish! ur phone is rooted and cwm is installed !!CWM has little bugs ..but its a never mind stuff..
use arrow to navigate..power button to select and 'go back' option in cwm itself to go to previous options.Comment if it worked for you...let others know!Download Files Below:Root_j.zipCWM_j.zipST26.zip
Donate Us if it Help you and help us to Buy our own Domian & hosting.

[Tutorial] Root, Unlock, Recovery and flashing a Custom ROM One




This guide is especially for the new users, experienced users should alrdy be familiar with this process.
By editandroid.blogspot.comStep 1: UnlockGo onhttp://www.htev.comand crte yourself an account on HTEV.Downloadthese adb/fastboot filesMake a new folder on your C:/ drive called fastboot for example.Extract the zip downloaded in step 2 to the new folderGo Herehttp://www.htev.com/bootloader/and select "All Other Supported Models" and "then begin unlock bootloader"Yes, Tick both Boxes, ProceedSkip up to step 8 as we have all we need for the first 7 stepsPower off your phone by holding the power button down for 10 secondsPower your phone on by holding power and volume downHighlight Fastboot With Volume+or- then press PowerPlug your phone into your PC and open a Command Prompt.( XP - Click Start > Run > type CMD in box then press OK( 7 - Click Start > type CMD in srch box then press Enter)Change directory to your folder where we put fastboot files c:\fastbootType this into your command prompt window fastboot oem get_identifier_tokenSelect & copy the text as per step 9 on the HTev websitePaste your identifier token into the box at the bottom and submitYou Will Very Shortly Receive an email from HTev with a link to the second part of the instructions and your "Unlock_.bin" attachedDownload the "Unlock_.bin" from the email and save it to the same folder that we extracted fastboot files to in step 2Type this into your command prompt window fastboot flash unlocktoken Unlock_.binThe Display Will change on your phone, press Vol + to accept and power to confirm.Step 2: RecoveryDownload the Android SDK(optional)Download the recovery of your choice, here a few links:-CWM-CWM 2-TWRPPlace the Recovery file you downloaded where the fastboot.exe is (Either in the loion of your downloaded fastboot drivers or in the Android SDK directory)Now open the cmd and navigate to the folder where the Recovery File is loed or just open a cmd with shift and right click at the correct directoryNow type:fastboot flash recovery name_of_the_recovery.imgFor example:fastboot flash recovery recovery-clockwork-touch-6.0.2.8-m7.imgNow your recovery is installedStep 3: RootNow root your phone with SuperSU by Chainfire or SuperUser by koushDownload SuperSU from this linkorSuperUser from this linkFlash it with the Recovery:Power off your device and then hold the VOL DOWN + Power to boot into the BootloaderNavigate with VOL and Power to RecoveryNow flash the .zip:- install zip from sdcard
- choose zip from sdcard
- select the downloaded SuperSU/SuperUser zip file and flash it
- Reboot nowNow you are able to flash any Custom ROM.Step 4: Custom ROMWith htev unlock you need to flash the boot.img after every ROM installationDownload the ROM you want to flashOpen the ROM zip with an archive manager and extract the boot.img out of it and place it in your fastboot directoryCopy the ROM to your sdcardNow boot into bootloader again (explained above) and choose recovery with your volume and power buttonIn recovery wipe data and cache aka fullwipe before flashing your ROM if you are moving to a new base (for example from CyanoMod to a Sense ROM, don't forget to backup your data files, like apps) (Often ROM chefs lve a note in their thrd if a fullwipe is needed or not, just follow their advices)Now flash your ROM by installing zip from sdcardIf this is finished, reboot and reboot into bootloader againConnect your phone to your PC in fasboot mode (choose in bootloader with power button)Open a cmd in your fastboot folder with your boot.img and type these two commands:fastboot flash boot boot.imgfastboot erase cacheThen reboot your phone and wait some minutes to see your ROM bootedEnjoyDonate Us if it Help you and help us to Buy our own Domian & hosting.

Custom Rom For Android Devices



Mike 1986Made This Butiful Rom For This Butiful Device (Donate him if you Like)Downloads




By editandroid.blogspot.com OneJelly Bn (Android 4.1.2)DownloadAndroid Revolution HD 2.0Download boot.img 0.1 (taken down)

One X
Jelly Bn (Android 4.1.1)DownloadAndroid Revolution HD 19.2Download boot.img 0.1Ice Crm Sandwich (Android 4.0.4)Download Android Revolution HD 9.9Download boot.img 0.1Stock Jelly Bn (Android 4.1.1)Download stock odexed 3.18.401.1Download stock de-odexed 3.18.401.1Download stock recovery 3.18.401.1Download stock boot 3.18.401.1 One X+Jelly Bn (Android 4.1.1)Download Android Revolution HD 6.5Download boot.img 0.1 Sensation / Sensation XE / Sensation 4GIce Crm Sandwich (Android 4.0.3)Download Android Revolution HD 7.1Download Android Revolution HD 1.2.2 T-Mobile Evo 3D (MA)Ice Crm Sandwich (Android 4.0.3)Download Android Revolution HD 2.0.1 Amaze 4GIce Crm Sandwich (Android 4.0.3)Download Android Revolution HD 3.0.1 Incredible SIce Crm Sandwich (Android 4.0.4)Download Android Revolution HD 5.3 Desire HD / Inspire 4GGingerbrd (Android 2.3.5)Download Android Revolution HD 7.2Download Android Revolution HD 6.5

Galaxy Note 2
Jelly Bn (Android 4.1.2)Download Android Revolution HD 12.0 Galaxy S3Jelly Bn (Android 4.1.2)Download Android Revolution HD 23.1Jelly Bn (Android 4.2.1)Download Android Revolution HD 30.3 (taken down) Galaxy Note 10.1Jelly Bn (Android 4.1.2)Download Android Revolution HD 4.4
Eee Pad Transformer TF101Ice Crm Sandwich (Android 4.0.3)Download Android Revolution HD 3.6 Eee Pan Transformer TF101GIce Crm Sandwich (Android 4.0.3)Download Android Revolution HD 3.5 Galaxy (GSM)Ice Crm Sandwich (Android 4.2.2)Download Android Revolution HD 10.0 Galaxy (LTE)Ice Crm Sandwich (Android 4.2.2)Download Android Revolution HD 6.2
Donate Us if it Help you and help us to Buy our own Domian & hosting.

Custom Rom for Google 4 Android 4.2.2 AOKP


Hello everyone! I started building AOKP roms a while back for the Galaxy and would like to support the 4!
By editandroid.blogspot.com

Fresh InstallWipe data/Factory ResetWipe Cache PartitionWipe Davlik CacheFlash ROM.zip, Gapps, and Kernel if desiredRebootComing from previous nightlyWipe Cache PartitionWipe Davlik CacheFlash ROM, Gapps, and Kernel

ROMS:
4.2.2
03/08/2013
03/07/2013
03/04/2013
03/01/2013
02/28/2013
02/22/2013
02/21/2013
4.2.1
01/22/2013

GAPPS:
4.2.2 Gapps
4.2.1 Gapps

If you download my Rom, Let me know!Donate Us if it Help you and help us to Buy our own Domian & hosting.

Custom Rom for Galaxy Exhibit 4G cyanomod 10 custom rom free working





Cyanomod 10


Working: on 4.1.2By editandroid.blogspot.com
PhoneDataWifiBluetoothCamera (with some minor annoyances)Wifi and USB tethering

Not workingPlse let me know and I will update

Latest Build:
CM 10 Build Date 02/25/2013
*New kernel 3.0.66 built from arco's JB3.0*New Exhibit splash screen*Camera Flash is working*WIFI Tethering is back*Sync with latest CM sources

CM 10 Build Date 02/17/2013*New kernel 3.0.64 built from arco's JB3.0 pmem branch*4.2 gesture board*Sync with latest CM sources
CM 10 Build Date 02/11/2013 Ftures 3.0.62 Kernel with working camera! (Huge thanks to Arco68)
CM 10 Build Date 11/26/2012MD5 Sum: db905c0a84bb5a57be944af8cc2fc668Changelog:
WIFI and USB TetheringDim behind statusbar modRIL (911) fix

Addons:
JB Gapps for 4.1 20121011
SwapSD by Jocala forJB
4.2 board (gesture typing) & Gmail for 4.1
CM9 CameraHal for CM10 based roms to include RootBox, SlimBn, MiUi, etc....
https://www.dropbox.com/s/e96oa57az7...l.slimbn.zipThanks lunerceli

These are forked from Arco's Thrd (Many Thanks!) May be useful for those with many apps

InstallAppBakfrom Market, run it and save a list of all your apps.
InstallSMS Backupand Restore from Market, run it and backup your SMS history.
InstallCall Logs Backup and Restore from Market, run it and backup your call log history.

WARNING: Many apps will Force Close crash if you restore data from a previous ROM.
Tags:,,,,,,micromax,zen,spice,lava,,,galaxy,omnia,lumia,xperia,desire,ninja,smart tab,canvas,HD,ROM,ROMs,recovery,custom recovery,cwm recovery,twrp recovery,root,rooting,how to,how,install,Ubuntu,Ubuntu in android,install custom rom,download,free,unlock,boot loader,Donate Us if it Help you and help us to Buy our own Domian & hosting.

AVATAR ROM FOR GOOGLE 4 CUSTOM ROM


A CUSTOM ROM IS DEVELOPED BY AVATAR GROUP FOR GOOGLE 4
CM based ROM for 4


ANDROID JELLYBM 4.2.2
CM 10.1 BASED
By editandroid.blogspot.com

Instructions:

Install ClockworkMod or TWRP Recovery.Do a NANDroid backup of your current ROM from backup/restore menu.Wipe Data/Factory Reset & Wipe cache partitionFlash the downloaded .zip file.Install Gapps package.

OF AVATAR ROM HERE


DOWNLOAD AVATAR ROM HEREDOWNLOAD GAAPS HERE

Tags:,,,,,,micromax,zen,spice,lava,,,galaxy,omnia,lumia,xperia,desire,ninja,smart tab,canvas,HD,ROM,ROMs,recovery,custom recovery,cwm recovery,twrp recovery,root,rooting,how to,how,install,Ubuntu,Ubuntu in android,install custom rom,download,free,unlock,boot loader,Donate Us if it Help you and help us to Buy our own Domian & hosting.

ONE CLICK TOOLKIT FOR ONE X





Functions:By editandroid.blogspot.com
V1.0
Flash Kernels & Modules
Flash Recoveries
Reboot The Phone
Reboot Into Recovery/Bootloader
V1.1
Kernel Repack - Phone on Android with USB Debug Enabled - No Need For The Recovery
v1.2
MultiKernel Repack
Repacked output Format Kernel.Ram.IMG
V1.3
One Click Root
V1.4
Reworked Module Flasher
Decrsed/Removed some delays
Fixed Faux Module Unzipping Problem
V1.5
Added RUU Zip Flashing Ability - For Advanced Users
V1.6
Added Erase Cache
Added Basic Help Section
Added About
V1.7
Added Lock/Unlock Option
This Requires HTev's Unlock_.bin,
Which has to go into the unlock folder
Updated V1.8
IMG/APK Flasher/Installer (With The Open With Command (will add an association option later on))
V1.9
Added Logger (Log/kmsg/last_kmsg retriever)
V2.0
Can Now Flash Modules Without Having To Flash The Kernel,
Modified The Logger (Debugger) To Show Logs In Console, As it's Much Better At Handling Text
Removed Log Limit
Now Can Repack with Langer Method With Connecting the phone [fix]Dont Touch The Apps Folder
Kernels/Modules/Recoveries go into there respective folders,
and they will appr in the app

Connect The Phone To The PC Via a USB Cable In Anymode (Android(With USB Debug)/Recovery/Bootloader) Though Preferably In The OS or The Recovery,
Choose The Option You Want, E.g. Flash Kernel
Choose The Option That Show Up, The Kernel & its Modules.
Choose What To Do On Completion
Click Perform Action, Site & Wait.
Requirements:Unlocked Bootloader/S-Off
CWM Recovery (Havent Tested other recoveries)
USB Debug Enabled (Settings --> Developers Tools --> USB Debug)
.Net Framework 3.5(Only need this if you get .NET framework initialization error)Though i have tested it and its working fine and just to cover my ass....
Always have a nandroid backup incase things go wrong,
If anything goes wrong i would help you, but i'm not to be held responsible for any damange done (hopefully there wont be any)


FOR DOWNLOAD CLICK HERE

Tags:,,,,,,micromax,zen,spice,lava,,,galaxy,omnia,lumia,xperia,desire,ninja,smart tab,canvas,HD,ROM,ROMs,recovery,custom recovery,cwm recovery,twrp recovery,root,rooting,how to,how,install,Ubuntu,Ubuntu in android,install custom rom,download,free,unlock,boot loader,Donate Us if it Help you and help us to Buy our own Domian & hosting.

Rooting Optimus L3 E4000 Tutorial


GUIDE FOR ROOTING YOUR OPTIMUS L3 E400
By editandroid.blogspot.com

First download the USB driver inhere

Extract and install the driver on your PC. then download this file

for :here
for Linux :here

Extract that file on a folder. Connect your Phone to PC, select PC Software and turn on USB Debugging wait until your pc detect your phone. click file "run.bat" ( ) or run "run.sh" via terminal ( Linux ). Wait until finish.

N.B : You can Use Superoneclick too!

Check on your phone app drawer. an app called superuser with a green skull logo. If there is you has success root your Optimus L3!
Donate Us if it Help you and help us to Buy our own Domian & hosting.

[Tutorial] Xperia Z & ZL Bootloader



this is the official way to unlock bootloader

Warning!

This procedure will wipe the /data partition of your phone, so you will loose all ur stored data, settings. SDCARD will BE WIPED!!!
By editandroid.blogspot.com
DRM WILL be lost forever
why to unlock bootloader?u can flash custom ROMs/Kernelsu dont need to worry if the new firmware can be rooted or not as with unlocked bootloader u can always ROOT ur device gives snk-pks/preview builds of latest OS which requires unlocked bootloaders, as they did with Xperia 2011/2012 line, so who knows may be may give rly builds of next android OS[ before we begin bootloader ]
get the IMEI for ur device: type *#06# in phone dialer to find it out, note only the digits (no dashes)download thefastboot package with usb drivers(alternate drivers if the ones in package dont workORthis)make sure u have a PC with USB cable to connect the phonepower down ur phone and keeping the Volume Up button pressed connect the USB cable to PC this will trigger FASTBOOT mode and will start driver installation, extract the above package and point the driver install to that loion (usb_driver) folderonce drivers are installed just disconnect cable and power on device[ how to unlock ](official way)
Go to:http://adfoc.us/7334320479609and rd everything!At the bottom click 'Start the Bootloader'Quote:First, you should confirm that it is possible to unlock the boot loader of your phone by checking the service menu. In your phone, open the dialler and enter *#*#7378423#*#* to access the service menu.

In your phone, tap Service info > Configuration > Rooting Status. If Bootloader unlock allowed saysYes, then you can continue with the next step. If it says No, or if the status is missing, your device cannot be unlocked.after u have verified that u can unlock bootloader, scroll to the bottom of the page and click "Continue"you will get numerous prompts, rd all info and if u agree click on "Accept"/"OK"/"Proceed"finally u will get a "Crte Unlock request" page, enter your IMEI (sometimes the last digit needs to be removed for this to work), name and email addressYou should now receive your unique unlock via EMAIL, SAVE THIS SAFELYExtract fastboot_with_Android_USB_file.rar and open fastboot folderHold SHIFT and right click on the background of the folderSelect 'Open command window here'Connect your phone in fastboot mode (turn phone off, hold Volume UP button and plug in USB Cable) [make sure drivers are installed as explained above)In the cmd type infastboot.exe -i 0x0fce gear versionIf a value is returned (it will return0.5), it mns the phone is correctly connectedType infastboot.exe -i 0x0fce oem unlock 0xand replacewith the which u received rlier.You're device should now be bootloader unlockedDonate Us if it Help you and help us to Buy our own Domian & hosting.

NEC Medias W -Dual Screen Smartphone


NEC Medias is one of the best product in MWC 2013By editandroid.blogspot.comIt is an Android phone with 2 4.3 inch L displays which can be used either together or separately. You can browse 2 websites at the same time , watch a on one screen while checking your mail on the other. You can actually play the same on both the screens simultaneously if you place the phone on desk. So two people can watch the comfortably without having to bump into ch other.You could also use both the displays together like one massive 5.6 inch screen and use it like a phablet. It runs on Android 4.1 JellyBn and is powered by a Qualcomm Snapdragon dual core processor and packs 1GB of RAM.There is a 8.1 Megapixel camera on the back and a 2100 mAh battery on the inside. There is about 16GB of storage onboardWatch the below:
Checkout some pictures of this Smartphone








The NEC Medias W N-05Ewill be first going on sale NTT DoCoMo in Japan in April this yr . The company also had a global prototype on display at the stand which mns that we could see it outside Japan too. I would totally buy this phone if NEC sold me one !
Donate Us if it Help you and help us to Buy our own Domian & hosting.

HOW TO ROOT GALAXY GRAND I9082 AND INSTALL CUSTOM CWM RECOVERY


Hello guys i am here to present you a way to root galaxy grand duos !!!

HERE IS THE


All you have to do is follow my instructions :
By editandroid.blogspot.comSTEP 1 :
-Download and setup ADB drivers for your device
First Step
Download USB Drivers for Mobile (x86 & x64) v1.5.9.0Uninstall previous version & rebootInstall New Drivers & reboot systemTurn ON “USB debugging” mode on your Android deviceThen Plugin your device and following second step

Second Step
Download Android ADB Interface Driverv2.9.503.726Connect your Android device to PC true USBGo to Device Manager on "My Computer", look for the phone and click on it.Click Properties >Update Driver>Browse>Let me pick>Computer>Have >Browse>Then select the driver youdownloadedReboot system & enjoy
STEP 2 :
-Download the recovery from here --->Click me !
-Download odin 3 from attachement below !
-Turn of your device and go to odin mode [ Vol down + power + home button (all at the same time) ] relse it when you see GT-i9082 logo
-Press vol up to confirm

STEP 3 :
-Now that you are in odin mode connect your device via usb cable !
-Now open Odin3 3.04 that you have downloaded from the attachement !
-If there is a pop-up like Installing ADB drivers let it get finished it is usually updates !!!!
It should look like this



-Make sure the COM : xx (xx is usb port it can be any so dont worry about it,just verify COM is lit up)-Extract the CWM-touch_i9082_chotu.tar.zip ! Now select PDA and browse to where you have extracteded CWM-touch_i9082_chotu.tar.md5 and select it

it should look like this

STEP 4 :
-Click Start
Now you have a cwm touch recovery !!!!
If any one is getting md5 hash value failed while flashing rename "CWM-touch_i9082_chotu.tar.md5 to ""CWM-touch_i9082_chotu.tar" (remove the .md5) and then flash it !
HOW TO ROOT THE DEVICE :-Download SuperSu (obviously the latest one) from here ------>Click me !
-Copy that to externel sdcard (NOT INTERNAL ! )
-Power off your device and press vol up + power + home button (all at once)
-Select install zip from sdcard --->choose zip from sdcard ---> scroll down and select UPDATE-SuperSU-v1.05.zip

Done ! And you are rdy to go
DOWNLOAD ODIN V3.04.ZIP FROM HEREif this method not work for youplz try thisWarning Before rooting Galaxy Grand Duos I9082:We are not responsible for any damages that may happened due to using this guide to root your phone. If any problem that related to rooting instructions, we will help you to solve it.Rooting is void your warranty of your phone.Use this guide at your own risk. We shall not have any liability or responsibility for whatever happens to you and your device by using the instructions in this guide.The instructions provided in this tutorial for eduional purpose only. There is no guarantee that these steps will work for your device.The steps given in this tutorial is only to use with Galaxy Grand Duosand the model isI9082. Applying this guide to any other device or any other model may produce many problems.Rd and Understand the whole tutorial first, before going to perform the steps.Pre Requirements to Root Galaxy Grand Duos I9082:A Galaxy Grand Duos Android Smartphone with the I9082 Model .A PC or Laptop.We recommend you to take a backup of your data in the mobile using PC suite or any other method. After rooting, the data won’t be deleted. In case if you miss some data you can restore it from the backup file.SMSContacts– Sync with Gmail Apps, s, Songs and Other Files– Copy to internal / External SD card or SystemAPN Settings– Take Manual Note from “Settings > Wireless & Networks > Mobile Networks > Access Point NamesThen maintain minimum 60% charge in your mobile’s battery. This will help your device to don’t get switched off.And Enable USB Debugging –“Settings > Developer Settings> USB Debugging”Then Disable any antiviruses and firewalls in your PC or Laptop. Because these tools may interrupts the process during the rooting.Files to be download to Root Galaxy Grand Duos:The following files are need to perform the process in the guide. So, download the following files one by one. And make sure that you have downloaded all the files. If the following download links were . Inform us to re post the download files.Super User – UPDATE-SuperSU-v1.00.zip – (860.26 KB) –HereHow to Root Galaxy Grand Duos:Connect your phone to PC using original USB data cable. Because, using other cables may produce not detecting problems.Then transfer the downloaded file to your Galaxy Grand Duos mobile’s SD card.After that, disconnect the phone from the PC.Switch off the phone.Now you need to open Recovery mode. For that, Press and Hold “Volume Up + Power + Home” buttons together.Then select “Install zip from SD card” and then “Choose zip from SD card”Just browse and select the UPDATE-SuperSU-v1.00.zip file that downloaded rlier.Wait for the process complete.After that, Select “Go Back” and then select “Reboot System Now”If your phone has stuck on the welcome screen or boot screen, just remove the battery and re insert it and do the above steps again.If you want to check whether your phone has rooted or not, srchRoot Checkerapp in Google Play store and install it. Then open it and you can find it your phone rooted or not rooted. Or check your mobile’s app list.Super Userapp has been installed on your phone. If the Super User app is not there in your phone your mobile doesn’t rooted successfully.Do share in comment section in case if you face any problems or met any errors in firmware update process. In future, we will update installing Custom ROM’s on your Galaxy Grand Duos. So, stay updated. Now you have successfully lrned how toroot Galaxy Grand Duos I9082.


Donate Us if it Help you and help us to Buy our own Domian & hosting.

[Tutorial] How To BootLoader Xperia V




How To Unlock BootLoaderBy editandroid.blogspot.comInformation:Quote:1: You MAY void your warranty!
2: bootloader will result in data loss! Be sure to backup! (SD-Card won't be affected)Other Info:
Quote:So I've never seen any Tutorial on this for Xperia V and decided to make one!Step 1: Download 'Xperia V Unlocked BootLoader.zip' from here --->http://www.mediafire.com/?hn1n73rfi6dapw0

Step 2: Extract the file you downloaded above on your PC. You’ll get the following three files:
Quote:1: drivers.zip
2: fastboot_with_Android_USB_file.zip
3: unlockbootloader.mobile.comStep 3: Hd over to 'unlockbootloader.mobile.com'

Quote:1: This will open a web page in your default browser. Scroll to the bottom of the Instructions on the page and you’ll see a link like “Continue”, click on it.
2: In the pop-up window click “Yes, I’m sure” and then in the next window click on both the checkboxes, and then click “I accept”.Step 4: Now insert the details as per the instructions

Quote:Remember! IMEI can be found by entering *#06# in the phone appliion!Step 5: You’ll get a to unlock boot loader. The can be found in your inbox. Write it down somewhere you can remember, it will be used later.

Step 6: Extract everything in step 2 into a folder

Step 7: Put your phone into fastboot mode
Quote:Turn your phone off. Press and hold Volume Up button while plugging your phone into your PC. A blue LED will come onStep 8: Install your device driver
Quote:1: Srch 'Device Manager' in the start menu
2: Right click your device (Should be S1Boot Fastboot OR Android Phone)
3: Click 'Update Driver'
4: Loe the driver folder (Remember to extract 'driver.zip')
5: It will automatically installStep 9: Now extract the fastboot_with_Android_USB_file.zip

Step 10: In the same folder as the extracted content of fastboot_with_Android_USB_file.zip, open command promt
Quote:Hold Shift while right-clicking in the folder and select 'Open Command Promt'Step 11: Here is the important part. Type these commands to unlock your bootloader!
Quote:1: Type in fastboot.exe -i 0x0fce gear version
2: It should return a value like “0.5”. This ensures that your device is correctly connected
3: Now type in fastboot.exe -i 0x0fce oem unlock 0x
Important! Remember the you recieved? Replace with thatStep 12: Let it run and when it is finished, your phone's bootloader should be unlocked!

One X+ Plus All in One Root/Recovery/Custom Roms/Stock Roms/Firm/Kernals/Guides/MODS/Tools all here




InternationalBy editandroid.blogspot.com

AOSP, CM, PA, AOKP

Jelly Bn 4.2.x

Pure AOSP (4.2.1) 1-31-13 by Lloir

AOKP (4.2.1) - 2.0e 3-14-13 by maxwen

CM10.1 (4.2.2) 4-24-13 by Lloir

OFFICIAL Slim Bn (4.2.1) by bedalus

Jelly Bn 4.1.x

AOKP (4.1.2) by maxwen

CyanoMod 10 (4.1) 1-6-13 by Lloir

Paranoid Android (4.1) 3-6-12 by Lloir

UNOFFICIAL Slim Bn by Mazda

Sense

4+

Android Revolution HD 6.5 by mike1986

BinDroid XTC by DutchDanny

CustoEndvour by shubhamchamaria

ELEGANCIA™ Rom Series 5.4.0 by Steve0007

InsertCoin 3.7.8 by baadnewz

JokerOneXplus 0.2 by emiliano7

OrDroid 4.0.0 by shnizlon

RomAur One X+ 1.0 by auras76

Tm Venom ViperX+ 1.0.7 by m0narx

Custom UI

Jelly Bn 4.1.x

MIUIAndroid 2.12.28 by jonah1234


-----------------------------------------------------


ATT, Telus, etc.

AOSP, CM, PA, AOKP

Jelly Bn 4.2.x

CyanoMod 10.1 (4.2.2) 2-18-13 by Lloir

Paranoid Android 3.15 by soloman56

Sense

4+

Blackout Mongoose 3.5.5 by cstayton

ELEGANCIA™ 5.0.0 by Steve0007

InsertCoin 1.1.3 by baadnewz

Tm Venom ViperXL+ 1.2.7 by Turge

QX Senseless 2.1 by hasoon2000


RUU and Stock ZIPS

RUU

Stock Rooted Deodexed Bases / Stock Flashable Zips by hasoon2000

[AT&T/TELUS] Stock Builds (1.19.502.1 & 1.20.661.1) by Turge

Kernels
International

AOSP, CM, AOKP

Blade by maxwen

ncx_oneX_+_international_v1 by n3ocort3x

The SickKernel by simonsimons34

Sense

EliteKernel OXP by nik3r

hXORe by bedalus

Kernel Source by hasoon2000

Stock Kernel with embedded kernel modules by nik3r


-----------------------------------------------------


ATT, Telus, etc.

AOSP, CM, AOKP

SUPER WIP Pizza Kernel by Lloir

Sense

Bst Mode Plus Addition by Zarboz

Kernel Source by hasoon2000

Mods and Resources
International

Mods

1.17.xxx.xx >>> Centered clock >>> Enhanced battery % mods <<< No clock by Michxda
Battery mod for One X+ by yosscal
DSPManager for One X+ by baha76_s
EQS toggles + AOSP recent apps by hassan89
Camera JB Plus by lyapota - Post by dinkelstefan
MusicBox 4 (Phoenix) by Steve0007
Remove Power Save notifiion icon by baha76_s
System Wide MOD BTS|EQS|APM|ROSIE by baadnewz
Rosie with Landscape and Context Menu Support by Turge
Recoveries
CWM v6.0.2.7 by Lloir
CWM TOUCH v6.0.2.7 by Kraizk
ClockworkMod Recovery 0.3 by mike1986
TWRP

-----------------------------------------------------

ATT, Telus, etc.
Mods
1.15.xxx.xx >>> Centered clock >>> Enhanced battery % mods <<< No clock by Michxda
DSPManager for One X+ by baha76_s
EQS toggles + AOSP recent apps by hassan89
Camera JB Plus by lyapota - Post by dinkelstefan
Remove Power Save notifiion icon by baha76_s
Rosie with Landscape and Context Menu Support by Turge
Recoveries
CWM v6.0.2.7 by Lloir
CWM TOUCH v6.0.2.7 by Kraizk
STOCK
TWRP

-----------------------------------------------------

Tools & Guides
Disabling SmartSync by baha76_s
Disable Boot Animation by hukel56
sy Kernel-Recovery Flasher by shubhamchamaria
File transfer app for Mac by Google - Post by pradeepd
HOWTO: Linux and MTP by Lloir
[HOW TO] Unlock bootloader, Root, Flash Custom ROM, Flash Kernel by hasoon2000
One X+ All-In-One Toolkit V2.1 by hasoon2000
[MAC] One X+ Toolkit 0.10/121215 by skdubg
One X One Click v1.9 by thunder07
Restore Missing Apps after Bootloader Unlock by shubhamchamaria
RootBoot by shubhamchamaria
Ultimate ROM Tool by maxio1998


Source:XDASpecial Thnx To:SixCarNage
Help Us To Buy our Own Domain and Hosting

How to Update Galaxy S3 I9300 to Android 4.2.2 Jelly Bn with SlimBn Build 4.2 Custom ROM





SlimBn Build 4.2 Android 4.2.2 Jelly Bn Custom ROM for Galaxy S3 GT-I9300 is out and available for download. Slim Bn tm recently relsed the Build 4.2 of Slim Bn 4.2.2 Jelly Bn custom ROM for Galaxy S3 I9300. The Build 4.2 relsed very soon after the relse of Build 4 with some quick fixes. Slim Bn custom ROM known for its minimum size and speedy nature. Those who alrdy update the Build 4 of Slim Bn 4.2.2 Jelly Bn ROM on their Galaxy S3 I9300, they can dirty flash their device with this Build 4.2. So, If you wish to try out this customized custom ROM Slim Bn 4.2.2 Build 4.2 on your Galaxy S3 I9300 then rd through this page to know the step-by-step procedure.

By editandroid.blogspot.comWarning!We at smartupdates write tutorial to help out fellow Android users but all this guide are eduional purpose only. You should try this guide at your own risk. Neither we nor the developer should be responsible if your Android device experience a damage after following this tutorial. Also remember,this guide is only applicable for Galaxy S3 I9300. Don’t try this guide in any other Android device. It may hard brick your device.Steps to install SlimBn Build 4.2 Android 4.2.2 Jelly Bn ROM on Galaxy S3 I9300Step-1:DownloadSlimBn Build 4.2 Android 4.2.2 Jelly Bn ROMfor Galaxy S3 to the computer [Alternativelink]Step-2:DownloadSlimBn Gapps[Google apps package]Step-3:Plug in the USB cable to the Galaxy Note to connect it with the computer. Then transfer the downloaded zip files to SD card of the device. Do not extract any filesStep-4:Unplug the USB cable from the phone and then turn it offStep-5: Place the device into recovery mode by pressing and holdingVolume Up,Volume DownandPowerbuttons together until the screen flashes. Then relse all three buttons[Note:In recovery mode, use theVolume to scroll between the options and usePowerbutton to select the desired option.]Step-6:While in recovery mode, first perform a Nadroid backup of the existing ROM which can be restored later if the new ROM does not work or users wish to go back to the previous ROM. To do so, selectBackup and Restorethen on the next screen selectBackupagain. When the action is completed, return to the main recovery menuStep-7: Perform data wiping task to avoid clash between the new ROM and the previous one. Selectwipe data/factory reset andthen selectYeson the next screen to confirm the action. Wait for a few minutes until the data wiping process is done and then go back to the recovery menu. Selectwipe cache partitionthen selectWipe Dalvik Cacheunderadvancedoption to perform Dalvik cache wiping. When the action is completed, return to the main recovery menuStep-8:Selectinstall zip from sdcardthen selectchoose zip from sdcard.Brose to the SlimBn Build 4.2 ROM zip file rlier copied to the SD card. Select it by pressing the Power button and confirm installation on the next screen. The installation procedure should start nowStep-9:After the ROM is installed, follow the similar procedure (step-8) and choose the SlimBn Gapps zip file to install the Google Apps on the phoneStep-10:Once the installation process is completed, go back to main recovery menu and selectreboot system nowto reboot the device and boot up into the new customised Jelly Bn ROM. The phone will take about five minutes to boot up for the first time[Note:To go back to the previous ROM, boot the device into recovery mode, selectBackup and Restorethen restore the ROM by selecting it from the list.] Galaxy S3 should now be running on SlimBn Build 4.2 Android 4.2.2 Jelly Bn ROM. Navigate toSettings>>About Phoneto verify the software version of the device.Slim Bn Build 4.2 Ftures:Add SlimPIdd Custom Shortcut TileAdd SlimIRCAdd Sound Recorder [deleted speech recorder]Add Camera sound toggleAdd Auto-Hide StatusbarMore Camera resolutionsNew Blacklist functionalityAdd ability to dismiss voicemail notifiionsPolish and clnup SlimCenterEnhance NFC from upstrm AOSPAdd complete IBSS Support in baseChanges:Update to JDQ39dded Music Playback Control TileAdded Developer option for MediaScanner Behavior Control on BootAdded TextAr size to MmsEnhanced Auto-Brightness UIUpdated PlayStore to v4.0.26Fixes:Fixed Translation issues [Spanish/Italian/Polish/Chinese/French]Fixed SlimSizer FCFixed BlackList button behaviorFixed NavBar menu hidden on soft devicesFixed SlimIRC bugsFixed DashClock extension icons hidden when minimizedFixed PIN entry disabled by some appsDonate Us if it Help you and help us to Buy our own Domian & hosting.

Source:SmartUpdate Special Thnx To:Mr.JaksonFor Inform Us

[HOW-TO] Root and install custom recovery CWM stock Gingerbrd on Optimus 2X (P990) for Dummies




Step 1:(Download software, boot phone in APX-mode).By editandroid.blogspot.com
First you need todownload Rusty!'s excellent ClockworkMod NVFlash-installer.(Mirror.) Then download theSU303.zip-package attached in this post and place it on your external SD-card, if you have one, if not place it on the internal one. Extract the contents of Rysty's .rar to a directory on any drive, I'll refer to this as C:\NV, but you can name it anything you like. Power off your phone andremove the battery. If you are using a desktop computer, plug the full-size USB-plug directly into a port on the motherboard (backside of the case usually). Press and holdvolume-up AND volume-downwhile plugging the micro-USB into the phone.

The next step is for people (well, computers rlly) who have not used NVFlash before. If you have, skip toStep 3.

Step 2:(Install APX-driver.)
If you have not used this mode before, called APX- or NVFlash-mode, your computer will indie it has found a new device it has no driver for. The screen on the phone will remain black.

Right-click My Computer, select Manage, then Device-management. You should see a device with a yellow exclamation mark. Right-click it, select update/install driver. Select to manually srch for a driver. Browse to C:\NV\driver, click Next. You should be greeted by a message telling you that «NVIDIA USB Boot-recovery driver for Mobile devices» has been installed.

Step 3:(NVFlash ClockworkMod.)
7/Vista:
Navigate to the C:\NV folder, double-click the script called «flash-recovery». If you have an external SD-card press 2, if not press 1.
XP:If you have an SD-card, double-click the "install_external_xp" batch-file, if not double-click the "install_internal_xp" batch-file.
The phone will display a Software-upgrade-screen, while the command-window will inform you of the progress. After a little while it'll be finished and you can press any to exit. (Now, where's that 'any'- again?) Just to be safe, wait another 10 seconds before removing the usb-cable from the phone, cutting its power. Now install the battery again.

Step 4:(Start ClockworkMod, install su.)Hold volume-down while pressing the power-.Keep both buttons presseduntil you see an -Logo with a bluish halo. Now you should be in the regular ClockworkMod. Choose «Install Zip from sdcard» (by navigating to it with the volume-buttons, then select it with the power-button) then «choose zip from sdcard». Navigate to where you putSU303.zip, select it and confirm. After a short while it'll inform you it's done. Press back-button, select «reboot system now.»Step 5.(Install Busybox.)Now go the market and install and run«Busybox installer»by JRummy16. Grant it root access when it asks, click OK bottom right, scroll to the bottom of the next screen and click Install. Voila, you're done. You can now do all the things you usually do, like restoring Titanium Backups etc.

DO at YOUR OWN RiskDonate Us if it Help you and help us to Buy our own Domian & hosting. Source:XDA


How To Install CWM and Flash Custom Rom On Galaxy Ace 5830i




How To Flash Cwm in Galaxy Ace 5830iAnd make a backup FirstBy editandroid.blogspot.com


Download cwm( CWM_temporary without kernel.zip) and place in sd card - (Download)Switch off the phone.Press sound up + home and power button together to got to recoverymode.Select "apply update from sdcard"Choose ClockWorkRec5830i.zip. CWM will load.Go to "backup and restore" and Select Backup.

# A backup will be crted under sdcard/clockworkmod/ on your SD CARD. Plz dont format your sdcard. Backup this folder if you can.


Rom List For Galaxy Ace 5830i
MindCr Rom{# Dont forgot to mount system partition before flashing}[08/11/2012] MindCr Rom v2.4 - (Original post) *(Directdownloadlink from form)[29/10/2012] MindCr Rom v2.3 - (Original post) *(Directdownloadlink from form)[15/10/2012] MindCr Rom v2.2 - (Original post) *(Directdownloadlink from form)*[Many apps removed. Visit original thrd for mor info and apps]*[08/10/2012] MindCr Rom v2.1 - (Original post) *(Directdownloadlink from form)
Jelly Blast ROM[29/11/2012] Jelly Blast V3.0.4 - (Original post) (Directdownloadlink from form)# Just update to 3.0.3. So u need 3.0.3 flashed on phone first.[10/11/2012] Jelly Blast V3.0.3 - (Original post) (Directdownloadlink from form)
iDROID ROM[29/9/2012] iDROID ROM v1 - (Original post) (Directdownloadlink from form)
BoudzDroid[29/9/2012] BoudzDroid V1 - (Original post) (Directdownloadlink from form)
AceCrm[30/9/2012]AceCrm V1.4 - (Original post) (Directdownloadlink from form)
RazoDroiD[26/9/2012] RazoDroiD v2.5 - (Original post(Directdownloadlink from form))
Ace-peria[04/9/2012] Ace-peria rom - (Original post) (Directdownloadlink from form)
TM COOPER[09/9/2012] M!-U! v2.2.1+ - (Original post)[2/9/2012] Retribution Beta 4 (Barebones version) - (Original post) (Directdownloadlink from form)[18/8/2012] Retribution Beta 4 (Extreme barebones version) - (Original post) (Directdownloadlink from form)[18/8/2012] Simplicity v1 - (Original post) (Directdownloadlink from form)
AndroidScrm[18/8/2012] AndroidScrm [V1] - (Original post) (Directdownloadlink from form)
Donate Us if it Help you and help us to Buy our own Domian & hosting. Now Flash Anyone Of them with CWM Recovery and Enjoy...Do at your own risk

How to Roo/Install Custom Recovery (CWM) Galaxy S duos S7562



How To Root & Flash CWM Recovery In Galaxy S duos S7562By editandroid.blogspot.com
Download S Duos rooting kit:http://d-h.st/BtL
Install drivers using kies
Boot into downloading mode by pressing Vol down + Power + Home button when you are switched off.
Open odin from the rooting kit and using odin, flash recovery.tar file (also present in rooting kit)
Just as the phone vibrates (after the flashing process completes) to reboot, eject the battery to prevent stock recovery from overwriting the cwm we just flashed.
Boot into cwm and flash cwm-superuser-3.1.3.zip file (again, present in the rooting kit)
Reboot your device and enjoy your rooted S Duos.
Do at your own riskif you face any problem Comment hereDonate Us if it Help you and help us to Buy our own Domian & hosting.

How to Root your Galaxy Note N7000




ROOT GUIDE METHODBy editandroid.blogspot.comRecommended method, does not incrse the flash counter so you can return the Note to stock if needed for warranty purposes.
First of all, here is a guide to illustrate the written instructions:

...and now here are the written instructions:


Here is a list of things you will need:
A fully charged Galaxy NoteA micro USB connection cableA PC (I have no experience with doing this on a mac, so for now the guide will only cover )The PC will need to have the USB drivers for the Galaxy Note installed:If you simply connect the Galaxy Note to the PC with the micro USB cable it will install themTo be very sure your device will be recognised by Odin connect twice - once with USB debugging enabled, and once without - different drivers are installed depending on the status of debugging (USB debugging is in Settings --> Appliions --> Developement)If you're still having no luck try also installing the latest version of 's KiesThe InitialCFRootflasher.ziphereThe correctChainfire Root kernel fromhere. In order to get the correct one for your firmware you need to go to Settings --> About phone and look at the kernel version. There will be a string there that looks something like this:2.6.35.7-N7000XXKJ4-CL641703. The bit you need to note down is the text I've helpfully highlighted in yellow. When you look at the file names in the CFRoot post that is linked to here you want the file that corresponds to that, for the KJ4 firmware the filename will look like this:CF-Root-SGN_XX_XEN_KJ4-v5.0-CWM4.zip.Quick update for those finding that their current firmware does not have a corresponding CFRoot kernel:flash a pure stock one with CFRoot support in Odin and you're good to go. Shouldn't incrse the flash counter, but even if it did there is now the TriangleAway app from Chainfire to reset it. Happy flashing.
OK, once you've assembled all the required bits follow these steps:
Unzip theInitialCFRootflasher.zipUnzip the CFRoot kernel, you'll get a .tar file, unzip that file and you should have a z fileRight click the z file and select copyOpen the folder where you extracted theInitialCFRootflasher.zip to, within that directory there should be a folder called z - paste the z file you copied into this folderBack out of that folder and you should see a file called"not-rooted-yet.bat" - open that file and you will be greeted with the program that will install the CFRoot kernel and Root the phoneConnect the micro USB cable to the phone, and then the computer - just plug it in - do not do anything else at this stageIf you look at the "not-rooted-yet"screen you will see a check list of things that you need to make sure you've done - if you've followed this guide to the letter then you should be good to go, but just run through them again to be on the safe side...Now simply follow the instructions within the"not-rooted-yet"screen - first you will see a story about the zergling's progress brking past your security (this will take a few minutes), if that is successful you'll be prompted to hit any again to install the CFRoot kernel - at the end of that flash your phone will rebootCongratulations, your Galaxy Note is now Rooted!!Donate Us if it Help you and help us to Buy our own Domian & hosting.

[GUIDE]How To Root Sprint Galaxy S3 (SPH-L710) or T-Mobile Galaxy S3 (SGH-T999)




How To Root Sprint or T-Mobile Galaxy S3?Just Follow This Simple StepsBy editandroid.blogspot.com
Step 1. Hold down Volume Down, Home Center, and Power buttons together for about 20 seconds until your phone resets and shows you an option to get into download mode.

Step 2. Next hit Volume Up button to enter download mode.
Step 3. Once in Download mode, you can connect your micro-USB cable from your Galaxy S3 to your computer.
Step 4. Next, downloadGalaxyS3RootSprint.zipand unzip, you should find all the files you need.Download GalaxyS3RootSprint.zip
Step 5. Next, make sure you have drivers installed, you should see " Mobile USB C Composite Device" in Device Manager. *If you don't, simplydownload Kiesand install it. *(Then unplug, plug the micro-USB cable.)
Step 6. Double-click onodin3 v1.85.exefile to start ODIN. *You should see a yellow highlighted box with a COM . *The doesn't matter just so long as you see a yellow box. *If you don't see yellow box, your drivers are not installed correctly OR try killing Kies in Task Manager as sometimes it can interfere.
Step 7. Choose "PDA" and choose "clockworkmod.TAR" file inGalaxyS3RootSprintfolder. *Then hit "Start".
Step 8. In about 10 seconds, your phone will reboot and give you ClockworkMod Recovery.
Step 9. You will get a "PASS!" if everything went correctly.
Step 10. Once your Galaxy S3 reboots, copy over the file*CWM-SuperSU-v0.87.zip*from the folder*GalaxyS3RootSprint*to the internal storage or SD card of your phone.
Step 11. Reboot into ClockworkMod Recovery by holding down Volume Up, Center Home, and Power button together for about 10 seconds.
Step 12. Once in ClockworkMod Recovery, choose “install zip from sdcard”.
Step 13. Next choose “choose zip from sdcard” or “choose zip from internal sdcard” depending on where you put the file in Step 6.
Step 14. Choose*CWM-SuperSU-v0.87.zip.
Step 15. Choose “Yes”.
Step 16. Once it’s done flashing the file*CWM-SuperSU-v0.87.zip (the Superuser zip file), simply reboot and enjoy a fully rooted Galaxy S3.
Step 17. You will find SuperSU app once rebooted.
Step 18. You can now run rootedapps!

Do At Your Own Risk!!!Comment Here if you Face any ProblemDonate Us if it Help you and help us to Buy our own Domian & hosting.

How To S-Off/Root/Flash recovery/SuperCID/DE-Brand/Flash Custom Rom/S-ON/ in Sensation





Step 1. To S-OFF your Sensation - (You do not need to do this if you have S-off alrdy or done this before)- WORKING NOW for TMOUS users
Visithttp://revolutionary.io/By editandroid.blogspot.com
download the appliion for your operating System. AND EXTRACT IT TO A FOLDER
YOU MAY NEED TO DISABLE YOUR ANTIVIRUS PROGRAM- Norton is flagging up Revolutionary as a Virus when it isn't
IMPORTANT
Fill out the form under the download links with your OS, Device, Hboot Version and . This will give your beta to enable you to S - OFF. Make a note of this.

How To get your Hboot Version - 3 methods below
1. Run the revolutionary Utility you just downloaded fromhttp://revolutionary.io/and if it has found your device it should rd
"Found your Device: Sensation Z710* Appliions -> Development)
4. With the phone switched on (not in HBOOT, just the regular home screen), plug in your USB cable and select sync mode.(IGNORE any warning messages on your phone telling you it cannot find Sync )

5. Launch revolutionary.exe. It should detect the phone and ask for your beta . Type it (BE CAREFUL, as its case sensitive) or copy and paste it in.
If Revolutionary fails to find your phone verify you have all the drivers installed, try drive mode or charging mode (Linux users can use drive mode. Confirmed to be working by others)
6. Once you have entered your beta correctly, follow any on screen prompts or actions from revolutionary and wait for it to S-Off,
7. You're done. Your Device will Successfully have S-OFF....if it hangs on method 3 and doesn't S-Off.See post 2 below for solutions.
IF REVOLUTIONARY SAYS FAILED YOUR PHONE IS NOT SUPPORTED. Go back and check hboot using the methods above. some users are told its failed and they still have S off now. If you have S-off your hboot will now be 1.17.1011 and revolutionary will tell you now your device is not supported

8. Revolutionary will now ask you to Install clockwork recovery mod after S OFF. Type N and install it manually below (the recovery provided is v4.0.1.4 doesn't charge when device is switched off, the one below v5.0.0.1 does charge)
9. Your Device now is S-off.

To install clockwork recovery for the sensation. Follow step 2!

STEP 2. To INSTALL Recovery -v5.0.0.8

1. Download recovery v5.0.0.8 for the SensationHERE: orMultiupload
2. Copy the PG58IMG file into the Root folder of your SD card (The main Folder of your Memory Card)
3. Turn off your phone FUlly and reboot into the Bootloader/HBOOT screen (see post above on how to get to hboot screen)
4. Press Volume up to Accept when it asks" Do you want to start the update"
5. Press Power Off to Reboot back to android after installation is successful (normal screen with homescreen)
6. Delete PG58IMG from your memory card and you can now root using step 3 below or install a custom ROM using CWM (Customs Roms are alrdy rooted)

7.OPTIONAL:Boot into recovery or Completely switch off (Fastboot disabled or remove and reinsert battery)
FollowSTEP 4 SUPER CIDsub steps 1-6 to get adb running
8. Enter the command "adb shell /sys/devices/platform/_battery/power_supply/battery/status" Phone will confirm it is "CHARGING"

Charging issues fixed with new clockwork recovery. writing is now BLUE not purple or orange

Step 3. To permanently root your Sensation -(This mns you will NOT LOSE ROOT on rebooting)
1. Download the file su-2.3.6.3-ef-signed.zip from here:DOWNLOAD
2. Copy su-2.3.6.3-ef-signed.zip to your SD card root folder (main folder of your memory card)
3. Start clockworkmod recovery (instructions below.See To Start Clockwork recovery)
4. BACKUP YOUR ROM USING CWM BEFORE ATTEMPTING ROOT!
5. Navigate to "Backup & Restore" using the Volume Down button and press select (power button to select) then select "Backup"
6. Select "install zip from sdcard" after backing up
7. Then select "Choose zip from sdcard"
8. Then select "su-2.3.6.3-efgh-signed.zip"
9. Then select "Yes - install su-2.3.6.3-efgh-signed.zip" to confirm
10. Then go back
11. Then reboot.
12. You're rooted!

If you are getting error messages regarding S-OFF, Rooting or installation - Troubleshoot below in post 2
SeePOST 2(HERE):

STEP 4. WRITE SUPER CID [YOU ONLY NEED TO DO THIS ONCE]-(continue from step 11 below if you have alrdy done this)
(allows you to flash ANY ROM to the device regardless of the carrier. Just click RUU.EXE)

1. Download adb tools here:download for ordownload for LINUXor from the attachments below
2. On your pc click on your local C: Drive (or D: drive for some) ( users: Start > My computer > Local (C)
3. Crte a new folder called "adb" and extract the files from adb.zip into it. Make sure it doesn't crte another folder in the adb folder when extracting
4. open command prompt (or terminal for linux) and type "" "followed by the path to your adb folder" ( users can type " C:\adb")
5. Ensure your phone is switched on (regular home screen) and connect it by USB in charging mode (Ensure usb debugging is on settings)
6. enter the command "adb devices". This is to confirm your phone is connected. (It should come back with list of devices attached and your )
7. enter the command "adb reboot-bootloader". (nothing further required device WILL reboot in bootloader)

IF it doesn't you can Manually put the phone in the bootloader/hboot mode
Navigate to fastboot by pressing volume down and pressing power button to select (power off > vol down + power on)
It will take you to the fastboot bootloader screen on your phone
Connect your phone via USB
Your Screen should now rd fastboot USB

8. enter the command "fastboot oem writecid 11111111"
9. enter the command "fastboot reboot-bootloader (Wait for it to reboot the bootloader)
10. enter the command "fastboot gear cid" [it should confirm your CID is 11111111]
11. enter the command "fastboot reboot"
12. You can now flash any ROM you like.

To reinstall any stock ROM after this or De-brand or reinstall a different type of Rom (Europn, Asian, US).
Just click here to download an Official Rom,
Connect to your phone in charging mode. click the "RUU_pyramid_*****.exe" file you downloaded and follow on screen instructions.

I can confirm SuperCID is successful as i just flashed a Tmous Rom (1.25.***) to my EU unbranded device to check. (added t-mobile and other carrier stuff to my apps list)

TO DE-BRAND OR REINSTALL STOCK ROM(Changes to Stock S-off, Removes Root and clockwork)
Reinstall your original stock ROM you had (e.g Vodafone, Tmous, Asian, Europn unbranded etc. if you are changing back to S-ON)

1. Backup all User Data and Apps (Titanium backup Recommended) SKIP THIS STEP IF YOU WANT TO WIPE EVERYTHING
2. Use the SUPERCID method above. (Confirmed to work)
3. If you cannot get superCID to work. Follow this by Alexp999.HERE:any problems PM ME and i will help
Your phone bootloader will rd "PYRAMID PVT SHIP S-OFF RL" after this, Root and clockwork will have been removed now

STEP 5 - CHANGING BACK TO S-ON - PROCEED WITH CAUTION. ONLY DO THIS IF YOU ABSOLUTELY HAVE TO. BEWARE THERE IS A RISK OF BRICKINGRD BEFORE GOING TO STEP 1.
YOU MUST Follow this correctly otherwise you could semi-brick your device (Semi bricks recovery by re-flashing RUU). If you follow it correctly YOU WILL GET S-ON SUCCESSFULLY -confirmed by other users
I cannot be held responsible if anything goes wrong but i will help in every situation. 2 unrecoverable bricks so far. 1 due to not flashing RUU
First time i did this with a custom ROM installed - semi-bricked my device (couldn't boot due to security warning as S-on doesn't work with custom roms), restored it using RUU.exe
Second time after S-off i took the following steps and successfully went back to S-ON without any problems and booted up into stock rom.

Confirmed to work by several others as well as myself
1. Follow Step 4 above to get SuperCID - Skip if you alrdy have it
2. Restore your official stock Rom:Just click here to download an Official RomRESTORE STOCK EVEN IF YOU JUST RESTORED IT RECENTLY OR ARE ALRDY ON STOCK ROM. This is to ensure nothing gets changed in stock for S-on to be successful
So if you are alrdy on a stock ROM or you just went back to stock ROM, i don't care, restore the stock ROM again using the RUU.exe if you don't want to be bricked!

Connect to your phone in charging mode. click the "RUU_pyramid_*****.exe" file you downloaded and follow on screen instructions.
3. Make sure when you download the RUU. download the same or similiar RUU version as your phone came with (e.g. Tmous or EU or Asian etc). As long as you install a stock rom similiar to what you had you should be ok. FAILURE TO DO THIS MAY BRICK YOUR PHONE.

4. Switch your phone on now and let it boot for the first time and just skip through the welcome screen.
5. Go back to Step 4 - SUPERCID and go through 1 to 7 to get to the fastboot bootloader. (so just do what you did before, put adb files in local , adb reboot bootloader etc)
6. enter the command "fastboot oem writesecureflag 3" (Thanks Dazweeja)
7. Reboot into bootloader using "fastboot reboot-bootloader" or remove & reinsert the battery and press power on while keeping hold of volume down.
8. Bootloader should now rd Pyramid PVT Ship S-ON RL.
9. Remove and reinsert the battery. Press power on as normal

You should now have S-on back and you can return your device or do whatever it is covered again under warranty.

10. IF IT DOESN'T REBOOT and bootloader says ***Security Warning**
Remove and re-insert the battery and go back into bootloader and holding Volume Down +power button select fastboot
11. Run RUU_Pyramid_***.exe to reflash stock rom. (the one u just downloaded in step 1) and then reboot. It should work now


The above method works successfully. So do not under any circumstances try this without going back to stock first using Ruu.exe. and Follow the instructions correctly if you want S-on WITHOUT problems Any doubts or questions PM me and i will get back to you and help you.

Donations welcome as i had a very shaky night experimenting and bricking my device (and having a panic attack over it) to find a safe method for successfully getting S-on back for all you out there complaining about warranty.

To Start Clockwork recovery
1.EITHERmake sure fastboot is disabled in settings and shut down your phone
This can be done via Settings > Power> Untick "FAST BOOT" at the bottom.
ORtake out your battery and put it back in.(this is sier)
2. Keep hold of the volume down button and switch your phone on.
3. Hboot will start. Navigate to recovery with the vol down button. Press power button to select and enter recovery.

To install a Custom ROM- you will not lose data or apps with this method!

1. Download your chosen ROM by other developers in the development thrds and copy the ZIP file to your SD Card ROOT directory
2. Start clockworkmod recovery (instructions above)
3. BACKUP YOUR ROM USING CWM BEFORE ATTEMPTING ROOT! (skip this step if you have alrdy made a backup previously)
4. Navigate to "install zip from sdcard" using the Volume Down button and press select (power button to select)
5. Then select "Choose zip from sdcard"
6. Then select "your_chosen_rom.zip"
7. Then select "Yes - install your_chosen_rom.zip" to confirm
8. Then go back
9. Then reboot.
10. First boot will take quite some time -This is normal, i know you want touch your nice shiny phone but BE PATIENT
Donate Us if it Help you and help us to Buy our own Domian & hosting.