Tuesday, May 24, 2016

How to Install ClockworkMod Recovery on the Electrify


While we have a rooted Electrify, the only thing we need to get started with custom ROMs is a custom recovery. The journey to the world of custom ROMs begins as soon as you load a custom recovery on your device. In this guide, we’re gonna show you how you can install the popularClockworkModRecovery on your Electrify smartphone.By EditAndroidI. Before You Begin:1. You must have rooted your device before doing this procedure. Plse hd to ourhow to root the Electrifyprocedure first, finish it, then return to this procedure and continue.2. Make sure your device has at lst 60% of battery life left. You need to maintain this battery level to ensure a smoother process.II. Downloading Required Files:BootStrapIII. Installing the Drivers:1. Download and place theRecoveryPackagrchive on your Desktop.2. Unzip files from the archive to your Desktop.3. Install the Drivers (32-bit or 64-bit) on your PC.IV. the Bootloader:1. Double-click on theRSD Litesetup you extracted on your Desktop and install it.2. Turn OFF your smartphone.3. Reboot your device into the Fastboot mode. To do so, press and hold theVolume DOWN+Powerbuttons together.4. ChooseFastbootfrom the given options.5. Connect the device to your PC using USB cable.6. Open a Command Prompt Window on the Desktop of your PC. To do that, press and hold theShiftbutton on your board and right-click on any empty ar on the screen, then chooseOpen command window here.7. Now, type in the following command into the Command Prompt Window:fastboot flash rdl.bin RDL3_unlocked.smg8. Next, issue the following command:fastboot oem unlock9. This should display the disclaimer on your screen. Note down the it shows, it’s important.10. Now, type in the following command, make sure to replace123with the actual you got in above step.fastboot oem unlock 12311. After your device is unlocked, pull the battery out of your device without disconnecting it from PC.12. Put the battery back into the device.13. Now, while your device is turned OFF, press and hold theVolume UP+Powerbuttons together.14. You should enter the RSD mode on your device.15. Right-click on theRSD Liteshortcut you have on your Desktop and chooseRun as administrator.16. From inside the RSD Lite, click on“…”and then loe theSBFfile that you extracted to your Desktop and select it.17. Hit theStartbutton to begin flashing the file.18. Reboot your device.Grt! The bootloader of your device has successfully been unlocked, let’s see how you can install theCWMRecovery on it.V. Installing ClockworkMod Recovery on the Electrify:1.) To begin, download the Bootstrap app from the link given abovnd copy it to the root of yourSDcard.
2.)Install the app via any file manager.

3.)Run the app and tap Install recovery.

4.)Accept the Superuser request when prompted.

5.)Plug your device into thewallchargerand verify that the phone is charging.

6.)Now tap Recovery Boot, to bring your device to boot into Tenfar’s CWM recovery.
Wonderful! You now have unlocked bootloader of your device as well as a custom recovery. These things are enough if you’re thinking to try out custom ROMs on your device!

No comments:

Post a Comment